Jet Cooling Unit

Jet Cooling Unit
Jet Cooling UnitJet Cooling UnitJet Cooling UnitJet Cooling UnitJet Cooling UnitJet Cooling UnitJet Cooling UnitJet Cooling Unit

Jet Cooling Unit

Die Casting : FEBTECH-0470

Introducing the Jet Cooling Unit for Die Casting - Achieve Superior Part Quality and Reduce Cycle Times

Die casting is a popular manufacturing process used to produce strong, precise metal parts efficiently. However, defects like porosity and long cycle times can reduce quality and productivity. Our innovative Jet Cooling Unit addresses these challenges through targeted, high-pressure water cooling during the solidification process.

Jet Cooling minimizes gas and shrinkage porosity by rapidly cooling core pins, inserts, and local hot spots. This prevents gas entrapment and controls shrinkage. Parts show less porosity, less scrap, and improved mechanical properties.

By cooling the die and casting quickly, Jet Cooling also significantly decreases cycle times compared to air or even conventional water cooling. This increases throughput and efficiency.

The Jet Cooling Unit prolongs die life by reducing soldering, insert washout, and other temperature-related damage. Pin life is extended 5X or more.

Compatible with high and low pressure die casting, Jet Cooling is an energy efficient way to boost quality and productivity. Unit attaches easily to existing dies.

Upgrade your die casting process today with the Jet Cooling Unit. Achieve parts with lower porosity, faster cycle times, and extended die life. Your bottom line will thank you.

Key Features

1

Targeted High-Pressure Water Cooling: The Jet Cooling Unit employs targeted high-pressure water cooling during the solidification process, ensuring precision in cooling core pins, inserts, and local hot spots.

2

Defect Minimization: Minimizes gas and shrinkage porosity by rapidly cooling critical components, preventing gas entrapment, and controlling shrinkage for parts with reduced porosity, less scrap, and improved mechanical properties.

3

Cycle Time Reduction: Significantly decreases cycle times compared to air or conventional water cooling, enhancing throughput and overall process efficiency.

4

Extended Die Life: Prolongs die life by mitigating temperature-related damage, reducing soldering, insert washout, and other factors that contribute to wear and tear. Pin life is extended by a remarkable 5X or more.

5

Improved Mechanical Properties: The Jet Cooling Unit contributes to enhanced mechanical properties of the cast parts, ensuring superior strength and precision.

6

Four Independent Outlets: The system is equipped with four separate and independent outlets, providing flexibility and customization options for various processes or components.

Product Specifications

TECHNICAL SPECIFICATIONFEBTEH-0470FEBTEH-0480FEBTEH-0490
Cooling Ports 204060
Outlet Pressure 0 to 10 Kgf /cm20 to 16 Kgf /cm20 to 16 Kgf /cm2
Outlet Port1/2" BSP Internal1/2" BSP Internal1/2" BSP Internal
Flow Rate 30 LPM60 LPM80 LPM
Colling System Open Loop / Close LoopOpen Loop / Close LoopOpen Loop / Close Loop
Inlet Water Pressure and Port Size1/2" bsp / 2-3 kgf/cm23/4" bsp / 2-3 kgf/cm23/4" bsp / 2-3 kgf/cm2
Storage Tank Stracture & Capacity Stainless Steel / 180 LtrStainless Steel / 200 LtrStainless Steel / 250 Ltr
Outlet Cooling Ports & Size1/2 inch x 2 Nos1/2 inch x 4 Nos1/2 inch x 4 Nos
Inlet Air Pressure and Port Size 1/2 " mm 4-5 kg/cm2 1/2 " mm 4-5 kg/cm2 1/2 " mm 4-5 kg/cm2
Pump Capacity 3.75kw/3HP 415V 5.5kw/3HP 415V5.5kw/3HP 415V
Control Power 24 V DC24 V DC24 V DC
Input Power 415 V 3PH 50HZ 415 V 3PH 50HZ 415 V 3PH 50HZ
Electrical Hardwares Siemens Siemens Siemens
Control System Mitsubishi Mitsubishi Mitsubishi
Pneumatics SMC SMC SMC
Color Grey + WhiteGrey + WhiteGrey + White
Logo

English (US)

Product & Services

Die Casting

Precision Tools

Spare Parts

Corporate HQ & Factory

Plot No: L34 & 35
MIDC Waluj,
Ch. Sambhaji Nagar,
MH, India

Legal

Legal Information

Terms of Use

Privacy Policy

Copyright@2023 Febtech Industries